Drilling explosion-proof surveillance system
The explosion-proof drilling surveillance system is specially designed for onshore oil and gas drilling and refining, offshore oil platform and various oil facilities. It is mainly used to monitor the actual situation of the rig sites and other industrial sites that need to be monitored. The system can meet the needs of drillers for real-time, dynamic and intuitive monitoring of key parts of the well site, such as mud pump field, drawworks, monkey board, etc., to display the operation status of the drilling rig during the operation, and can store and playback surveillance video records. It is an important equipment to ensure the safety of the drilling rig, improve the drilling efficiency, ensure the drilling quality and reduce the drilling cost. Especially when pipe stripping in and out, it allows the driller to easily see the situation when the traveling block reaches the monkey board platform without heading up carefully, which can significantly reduce the driller’s labor intensity and increase the accuracy of control.
-Multiple explosion-proof approved certification at domestic and abroad, including CNEX, ATEX, IEC, etc., meeting the requirements of international explosion-proof standards
-High protection level, stainless steel shell, suitable for all-weather stable operation under severe and high-risk conditions such as acid-base and marine salt spray corrosion, vibration, interference, high temperature and cold in the drilling site
-All kinds of cameras are combined to realize all-round monitoring of such hazardous areas as monkey board, drawworks module, mud pump module, solid control module, wellhead, traveling block travel area, catwalk, driller’s room interior, pipe rack area, etc
-Convenient red zone safety management on site
-The system has a built-in high-capacity HD network video storage module, and supports local and network video backup functions
-It supports a variety of HD camera cores, with high optical zoom and digital zoom functions, with a long monitoring distance and a wide range
-The signal can be transmitted remotely through the network, and the local and remote monitoring and control management can be realized simultaneously (optional)
-Constant temperature function, automatic defrosting function (optional)
-RS-485 control function, compatible with a variety of communication protocols and communication rates, can accurately and quickly respond to the instructions of various hosts
-It supports the monitoring of dozens of front-end points and the control of the PTZ, widely supports various general protocols, and is easy for function integration and expansion and upgrading
Ex Certifiate: | Support CNEx / IECex / ATEX |
Protect Grade: | IP66/IP68 |
Qty.of camera | 8/16/32 channel（optional） |
Camera resolution | 8MP/6MP/5MP/4MP/3MP/1080p/720p |
HDMI output | 1 channel, max. resolution: 4K（3840×2160）/30Hz |
VGA output | 1 channel, max. resolution: 1920 × 1080 / 60Hz |
Record mode | Manual / timing / event / motion detection / alarm / Motion Detection or alarm / Motion Detection and alarm |
Replay mode | Instant / general / event / tag / smart / log /external file |
Backup mode | Regular backup / event backup / video clip backup |
Hard drive | 4X SATA interface, each interface supports a hard disk with a max. capacity of 6TB |
Network interface | 1×RJ45 10M/100M/1000M Adaptive Ethernet port |
Serial interface | STD RS-485 serial interface×1(half duplex) ； STD RS-232 serial interface×1 |
USB interface | USB 2.0×2， USB 3.0×1 |
Alarm in/output | supporting（optional） |
Voice intercom | supporting（optional） |
PoE interface | Support RJ45 10M/100M Adaptive Ethernet port |
PoE STD | IEEE802.3af/at |
Network protocol | IPv6、UPnP、NTP、SADP、PPPoE、DHCP… |
Management | Support local and remote monitoring and control |
Power | AC 220V and supports customized |
Working environment | -40℃～60℃ / not over than 95%RH（+25°C） |
